Contact Information

Port Huron Mill
2199 Lapeer Avenue
Port Huron, MI 48060

ph. 800.553.3336
ph. 810.987.7770
fx. 810.987.9108

Belding Mill
302 Ashfield Street
Belding, MI 48809

ph. 800.553.3336
fx. 616.794.1214

For inquires or more info:
brassrod@muellerindustries.com

Title Image

Alloy Listings and Chemistries

Standard Alloys Header

UNS Designation Name Cu Pb Zn Fe T.O.E.
C34500 Thread Rolling Brass 62.0 - 65.0 1.50 - 2.50 34.5 (nom) 0.15 (max) 0.40 (max)
C35300 High Leaded Brass 60.0 - 63.0 1.50 - 2.50 36.5 (nom) 0.15 (max) 0.50 (max)
C36000 Free Cutting Brass 60.0 - 63.0 2.50 - 3.00 35.4 (nom) 0.35 (max) 0.50 (max)
C36010 Leaded Brass 60.0 - 63.0 3.10 - 3.70 35.1 (nom) 0.35 (max) 0.50 (max)
C37700 Forging Brass 58.0 - 61.0 1.50 - 2.50 38.0 (nom) 0.30 (max) 0.50 (max)
 

No/Low Lead Alloys Header

UNS Designation Name Cu Pb Zn Fe Sn T.O.E.
C27450 Lead-Free Brass 60.0 - 65.0 0.25 (max) 37.5 (nom) 0.35 (max)
0.50 (max)
C27451
N/A
N/A
N/A
N/A
N/A
N/A
N/A
C36300
N/A
N/A
N/A
N/A
N/A
N/A
N/A
C36500 Leaded Muntz Metal 58.0 - 61.0 0.25 - 0.70 40.0 (nom) 0.15 (max) 0.25 (max) 0.40 (max)
C37000 Free Cutting Muntz Metal 59.0 - 62.0 0.80 - 1.50 39.0 (nom) 0.15 (max)
0.40 (max)
 

Engineered Alloys Header

UNS Designation Name Cu Pb Zn Fe As Sn Al Mn Ni Si T.O.E
C35000 Medium Leaded Brass 60.0 - 63.0 0.80 - 2.00 37.4 (nom) 0.15 (max)





0.40 (max)
C35330 DZR Brass 59.5 - 64.0 1.50 - 3.50

0.20 - 0.25




0.50 (max)
C38500 Architectural Brass 55.0 - 59.0 2.50 - 3.50 40.0 (nom) 0.35 (max)





0.50 (max)
C48500 Naval Brass 59.0 - 62.0 1.30 - 2.20 37.5 (nom) 0.10 (max)
0.50 - 1.00



0.50 (max)
C67300 Dynalloy 58.0 - 63.0 0.40 - 3.00 34.1 (nom) 0.50 (max)
0.30 (max) 0.25 (max) 2.00 - 3.50 0.25 (max) 0.50 - 1.50 0.50 (max)
 

Shapes and Sizes

Sizes and Shapes

Shapes Minimum Maximum
(inches) (mm) (inches) (mm)
Rounds: 0.250 6.35 4.000 101.60
Hexagonal (1): 0.250 6.35 3.750 95.25
Squares: 0.375 9.53 2.000 50.80
Octagons: 0.375 9.53 3.500 88.90
Special Shapes Consult Mill
Cast and Turn Billets 5.000 127.00 12.000 304.80
(1) Round and Sharp Corners
 

Tolerance Header

Diameter Tolerances for Cold Drawn Bars

Diameter or Distance Between Flats Nonrefractory Alloys (1) Refractory Alloys (2)
To From Round Hexagons / Octagons Round Hexagons / Octagons
(inches) (mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches) (mm)
≥ 0.250 6.350 0.500 12.700 0.00150 0.038 0.00300 0.076 0.00200 0.051 0.00400 0.102
> 0.500 12.700 1.000 25.400 0.00200 0.051 0.00400 0.102 0.00300 0.076 0.00500 0.127
> 1.000 25.400 2.000 50.800 0.00250 0.064 0.00500 0.127 0.00400 0.102 0.00600 0.152
>2.000 50.800 4.000 (4) 101.600 15% (3)
30% (3)
20% (3)
40% (3)
(1) Non- Rrefracotry Alloys: C27450, C34500, C35300, C35300, C36000, C36500, C37700 (as extruded), C48500, C67300 (as extruded)
(2) Refractory Alloys: C37700, C67300 (as drawn)
(3) Denotes: % of specified diameter or distance between parallel surfaces to the nearest 0.001"
(4) Rounds: 4.00" max OD (drawn), Hexagonals: 3.75" max OD (drawn)


Straightness Tolerance

Shape Length Tolerance
Rounds All Lengths 1/4" in any 10' portion
Hexagonal & Octagonals All Lengths 3/8" in any 10' portion
Square All Lengths 3/8" in and 10' portion